2U Sliding ODF Fiber Optic Patch Panel 48 Port SC, OS2, Single
Mode, 0.9mm Pigtails
Slidable Rack-mount Fiber Optic Distribution Frame has sliding
fittings with self-locking functions prevent the drawer from
falling when moved; 19-inch rack mount for ST, SC, LC, MTRJ, FC
adapters. The drawer is the holding board for splicing, easy to
withdraw the fibers when testing and distributing.GPZ/JJ-CLD series
optical fiber terminal box can be applied in the branch connection
of fiber termination,working as distribution box,19’’standard
structure,rack mounting,available for the installation of
FC,SC,ST,LC adaptors.
Features:
Standard size, and reasonable structure
Slide out drawer for easy cable managementand operation.
Suitable for ribbon and single fiber
Compact design for space saving
Changeable adapter plate to fit different adapter interface
Front mark on the plate is easy for identification and operation
Front cover use Metal with transparent organic glass window in the
middle for Good Visibility and observation.
Top cover is removeable,easy for operation.
Application:
Telecommunications subscriber loop
Fiber to the home (FTTH)
LAN/WAN
CATV
Specification:
,Structural features.
* All property indexes are in accordance with National YD/T925—1997
* The body make use of cold rolling steel sheet Strong adhesive
force, artistic and durable.
* Distinctive design of 1-6 cable entrance and fiber exit of 1-24
cores assures flexibility.
* Cable entrance are sealed with oil resistance NBR to increase the
flexibility. Users can choose to prick the entrance and
exit.
* Overlapping fiber-melting tray and separate insulation earth unit
make the disposition of the cores, expanding the capacity
and cable-earthen flexible, convenient and safe.
III,Main technical Specifications
* External Size: (length×width×height) 430x300x(1U~7U)
* optical fiber winding radius: ≥40mm
* extra loss of fiber tray:none
* fiber length left in tray:≥1.6m
* fiber capacity: 12~288 cores
* working temperature: - 400C ~ + 600C
* lateral pressure-resistance: 500N
* shock-resistance:750N
IV,Operations
* Peel the cable , take off the outer and inner housing, as well as
loose contract tube, and wash off the filling grease,
leaving 1.1～6m fiber and 20～40mm steel core.
* Fix the cable-pressing card and the cable, as well as the cable
reinforce steel core.
* Lead the fiber into the melting and connecting tray, fix heat
contract tube and melted tube to one of the connecting fiber.
After melting and connecting the fiber, move heat contract tube and
melted tube and fix the stainless (or quartz) reinforce
core stick ,make sure the connecting point is in the middle of the
housing pipe. Heat the pipe to make the two into one.Put the
protected joint into the fiber-laying tray.(one tray can lay 24
cores)
* Lay the left fiber in the melting and connecting tray evenly, and
fix the winding fiber with nylon ties. Use the trays from
the bottom up. After all the fiber has been connected, cover the
top layer and fix it.
* Position it and use the earth wire in accordance with the project
plan.
V,Packing List
* terminal case main body: 1 piece
* polishing sand cloth: 1 pcs
* Mounting ears :1 set (include mounting screws)
