12F MPO/male to LC patch cord, Multimode OM4, with colored 0.9mm
breakout cables
UNIFIBER provide complete solution for your data center
interconnection solution, including MPO/MTP Trunk Cable ,MPO/MTP
Harnesses Cables ,MPO/MTP Fan out 0.9mm Patch Cords ,IP-Series
MPO/MTP Assembly ,High Density Patch Cords ,MPO/MTP Loopback ,MT
Patch Cords ,MPO/MTP Cassettes ,MPO/MTP Fiber Optic Patch Panel.
The MPO/MTP breakout fan-out patch cord is a multi-fiber jumpers
which is used in high density fiber networks. It's specifically
designed for fast ethernet, data center, fiber channel and gigabit
ethernet applications.MTP /MPO trunk cable, a cost-effective
alternative to time-consuming field termination, is designed for
high-density fiber patching in data centers which need space saving
and reduce cable management troubles.
Applications:
High Density Cabling Solution
MPO/MTP cassette
Telecom system
Data Center
FEATURES
Fiber type available in SM (G652D, G657A1, G657A2), MM (OM1, OM2,
OM3, OM4)
Multi-fiber connector type available in MTP, MPO with APC or PC
polishing type
Single-fiber connector type available in LC, SC with APC or UPC
polishing type
Fiber count available in 8, 12, 24
Fanout length available in 0.5m, 1m, etc.
MTP/MPO connector type available in Male, Female
Insertion loss type available in Standard, Elite / Low Loss
Cable jacket type available in OFNR, LSZH, OFNP
Parameters
| MPO/MTP Termination |
| Type | Single mode(APC polish) | Multi mode(PC polish) |
| Fiber count | 8,12,24,etc. | 8,12,24,etc. |
| Fiber type | G652D,G657A1 etc. | OM1,OM2,OM3,OM4 etc. |
| Maximum Insertion Loss | Standard | Elite Low Loss | Standard | Elite Low Loss |
| ≤0.75dB | ≤0.35dB | ≤0.75dB | ≤0.35dB |
| Return Loss | ≥55dB | N/A |
| Working Temperature | -40℃～80℃ | -40℃～80℃ |
| Test Wavelength | 1310nm | 850nm |
| Generic Connector Termination |
| Type | Single mode | Multimode |
| UPC | APC | PC |
| Max,Insertion Loss | ≤0.3dB | ≤0.3dB | ≤0.3dB |
| Typical Insertion Loss | 0.2dB | 0.2dB | 0.2dB |
| Return Loss | ≥55dB | ≥65dB | ≥25dB |
| Working Temperature | -40℃～80℃ |
| Test Wavelength | 1310nm | 850nm |
| All MM SM shall be tested for IL |
