Low Loss 8/12/24 strand MTP/MPO OM4/OM5 50/125 Multimode trunk
cable patch cord polarity B for high density cabling
MPO/MTP trunk cables are used to interconnect cassettes, panels or
ruggedized MPO fan-outs, spanning MDA, HAD and EDA zones, and easy
to rapid deployment of high density backbone cabling in data
centers and other high fiber environments reducing network
installation or reconfiguration. Each cable has a Male or Female
MTP/MPO connector on each end. With highly integrated design and
manufacturing capability, UNIFIBER provide complete solution for
your data center interconnection solution, including MPO/MTP Trunk
Cable ,MPO/MTP Harnesses Cables ,MPO/MTP Fan out 0.9mm Patch Cords
,IP-Series MPO/MTP Assembly ,High Density Patch Cords ,MPO/MTP
Loopback ,MT Patch Cords ,MPO/MTP Cassettes ,MPO/MTP Fiber Optic
Patch Panel
FEATURES
Polarity available in Type A, Type B, Type C, Type R
Insertion loss type available in Standard, Elite / Low Loss
Supports up to 8F 12F, 24F, 48F, 72F, 96F, 144F, customized
products are available
MTP/MPO connector type available in Male, Female, Male to Female
Fiber type available in SM (G652D, G657A1, G657A2), MM (OM1, OM2,
OM3, OM4)
Cable jacket type available in OFNR, LSZH, OFNP
Multi-fiber connector type available in MTP, MPO with APC or PC
polishing type
Supports 40G and 100G network applications
100% pre-terminated and tested in factory to ensure transfer
performance
APPLICATION
High density architectures
Data communication network
Optical System Access network
Storage area networking fiber channel
Parameters
| MPO/MTP Termination |
| Type | Single mode(APC polish) | Multi mode(PC polish) |
| Fiber count | 8,12,24,etc. | 8,12,24,etc. |
| Fiber type | G652D,G657A1 etc. | OM1,OM2,OM3,OM4 etc. |
| Maximum Insertion Loss | Standard | Elite Low Loss | Standard | Elite Low Loss |
| ≤0.75dB | ≤0.35dB | ≤0.75dB | ≤0.35dB |
| Return Loss | ≥55dB | N/A |
| Working Temperature | -40℃～80℃ | -40℃～80℃ |
| Test Wavelength | 1310nm | 850nm |
| Generic Connector Termination |
| Type | Single mode | Multimode |
| UPC | APC | PC |
| Max,Insertion Loss | ≤0.3dB | ≤0.3dB | ≤0.3dB |
| Typical Insertion Loss | 0.2dB | 0.2dB | 0.2dB |
| Return Loss | ≥55dB | ≥65dB | ≥25dB |
| Working Temperature | -40℃～80℃ |
| Test Wavelength | 1310nm | 850nm |
| All MM SM shall be tested for IL |
